Labels:bird | earth | grass | reckoner | road | sidewalk | sky | windowpane OCR: AppendixA -PE Card Modification Instructions GENEVE Modifications GENEVE Modifications The GENEVE computer requires that one 7812 voltage regulator be jumpered Also, if the computer RESET switch is to be functional, the RESET wire from the HARNESS must be attached to the GENEVE as shown below After making the modification be sure to label the card for use in only the PE/2 type ex- pansion chassis. This is the 7812 voltage regulator Install jumper between pins and RT Attach RESET wire from hamess to this point. 8500 Blow up of RESET circuitry PEI2 User's Manual Doc 1.0 Appendix Iustactons harmess Doc1
